Inventor error codes

Display codes

Inventor F0

Current overload protection

Inventor – Aria AR5 (AR5VI / AR5VO)

Ranges
  • Aria AR5
  • Outdoor unit
  • Also shown as PC08
  • Lamps: run lamp blinks 1×, timer lamp lit

Likely causes

Supply, blockage in the system, compressor, reactor.

First checks

Check the supply → look for a blockage → measure the compressor windings → reactor → wiring → outdoor PCB.

Note

Only on some models.

Source: Inventor Wall Mounted Unit Service Manual V:1.0.062022, ManualsLib page 108

Inventor U6RSL multi split (Midea-built)

Ranges
  • U6RSL multi
  • U5MRSL multi

Over-current protection

  • Lamps: run lamp blinks 1×, timer lamp lit

Likely causes

Refrigerant system, outdoor ambient above 50 °C, poor ventilation, dirty outdoor coil, blocked pipe, main board.

First checks

Measure the input current → check the airflow and the outdoor coil → look for a blocked pipe → replace the main board.

Note

Only on some units.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 31, 50

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Inventor error codes