Inventor error codes

Display codes

Inventor P1

Over- or under-voltage

Inventor – Aria AR5 (AR5VI / AR5VO)

Ranges
  • Aria AR5
  • Outdoor unit
  • Also shown as PC01
  • Lamps: run lamp blinks 2×, timer lamp flashing

Likely causes

Supply, wiring, IPM board, reactor.

First checks

Check the supply; DC voltage P–N at standby 310 V, 340 V or 380 V (220–400 V while starting); check the reactor.

Source: Inventor Wall Mounted Unit Service Manual V:1.0.062022, ManualsLib page 110

Inventor U6RSL multi split (Midea-built)

Ranges
  • U6RSL multi
  • U5MRSL multi

Over- or under-voltage protection

  • Lamps: run lamp blinks 2×, timer lamp flashing

Likely causes

Supply, bridge rectifier, IPM board.

First checks

Measure L–N: 220–240 V → check that the DC voltage P–N is in range → check the bridge rectifier → the IPM board → the main board.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 31, 46

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Inventor error codes