Midea error codes

Indoor unit codes

Midea EC

Refrigerant leak detected

Inventor U6RSL multi split (Midea-built)

Ranges
  • M2OH / M3OE multi
  • Lamps: run lamp blinks 7×, timer lamp off

Likely causes

Leak, blockage, coil sensor T2 not attached to the coil.

First checks

Is cold air coming out? → check that T2 sits on the coil → search for a leak; check for a blockage.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 31, 42–43

Midea – old 2-character codes (about 2017–2019)

Ranges
  • Oasis Plus 2018
  • Indoor unit
  • Lamps: run lamp blinks 7×, timer lamp off

Likely causes

Leak, blockage, coil sensor T2 loose or misplaced, indoor PCB.

First checks

Is cold air coming out? → search for the leak, repair and recharge; check for a blockage; check that T2 sits firmly on the coil → indoor PCB last.

Source: Midea Technical Support, New Error Code System – Typical Troubleshooting Cases (Dec 2019), slide 4

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Midea error codes