Midea error codes

Indoor unit codes

Midea F3

Discharge sensor T5 open or short

Inventor U6RSL multi split (Midea-built)

Ranges
  • M2OH / M3OE multi
  • Lamps: run lamp blinks 4×, timer lamp lit

Likely causes

Sensor, outdoor PCB.

First checks

Measure the sensor's resistance against its R-T table (5 kΩ at 90 °C) → replace the sensor or the PCB.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 31

Inventor U6RSL multi split (Midea-built)

Ranges
  • M2OH / M3OE multi

T2B sensor of room C missing or faulty

Likely causes

Sensor, its connector.

First checks

Check the connector → measure the sensor's resistance against its R-T table.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 32–33

Midea – old 2-character codes (about 2017–2019)

Ranges
  • Oasis Plus 2018

Discharge sensor TP open or short

  • Outdoor unit
  • Lamps: run lamp blinks 4×, timer lamp lit

Likely causes

Sensor, its connector, outdoor PCB.

First checks

Check the connector; measure the sensor's resistance against its table; sampling voltage below 0.06 V or above 4.94 V = fault → sensor, else PCB.

Source: Oasis Plus 3D Inverter Series 2018 Service Manual, R32, p. 67

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Midea error codes