Midea error codes

Indoor unit codes

Midea F5

Outdoor fan speed out of range

Inventor U6RSL multi split (Midea-built)

Ranges
  • M2OH / M3OE multi
  • Lamps: run lamp blinks 6×, timer lamp lit

Likely causes

Fan blocked, wiring, fan motor, outdoor PCB.

First checks

Turn the fan by hand → check the wiring → check the PCB's output to the motor: the phases should be equal.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 31, 48

Inventor U6RSL multi split (Midea-built)

Ranges
  • M2OH / M3OE multi

T2B sensor of room E missing or faulty

Likely causes

Sensor, its connector.

First checks

Check the connector → measure the sensor's resistance against its R-T table.

Source: Inventor Multi Split Unit Service Manual V:1.0.062022, p. 32–33

Midea – old 2-character codes (about 2017–2019)

Ranges
  • Oasis Plus 2018
  • Outdoor unit
  • Lamps: run lamp blinks 6×, timer lamp lit

Likely causes

Fan motor, its wiring, outdoor PCB.

First checks

Turn the fan by hand (blocked?) → check the motor connector and its voltages → replace the motor or the PCB.

Note

Out of range = below 200 or above 1500 rpm.

Source: Oasis Plus 3D Inverter Series 2018 Service Manual, R32, p. 64

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Midea error codes