Mitsubishi Electric error codes

Indoor lamp, while the fault is live

Mitsubishi Electric blinks continuously

Miswiring or serial signal error

Mitsubishi Electric MSZ-AY / HR / EF / LN – lamp and LED codes

Ranges
  • MSZ-AY / MUZ-AY
  • MSZ-HR / MUZ-HR
  • MSZ-EF / MUZ-EF
  • MSZ-LN / MUZ-LN

Likely causes

Interconnect miswiring; no serial signal from the outdoor unit for 6 min; the indoor unit was once run on an MXZ multi outdoor unit that is not a low-standby type.

First checks

Follow the miswiring and serial signal check: 230 V on S1–S2 → voltage on S2–S3 → indoor or outdoor board; if the indoor unit was used on an MXZ before, clear the fault memory.

Note

The lamp blinks 0.5 s on, 0.5 s off without stopping.

Source: Mitsubishi Electric service manual OBH932 (MSZ-AY, Dec 2022), p. 35

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Mitsubishi Electric error codes