Mitsubishi Electric error codes

Outdoor inverter-board LED, live

Mitsubishi Electric 1 blink

Frequency lowered: input current too high (not a fault)

Mitsubishi Electric MSZ-AY / HR / EF / LN – lamp and LED codes

Ranges
  • MSZ-AY / MUZ-AY
  • MSZ-HR / MUZ-HR
  • MSZ-EF / MUZ-EF
  • MSZ-LN / MUZ-LN
  • Outdoor unit
  • unit runs

First checks

Check the filters, the refrigerant and for air short-cycling.

Note

Input current above about 10 A. On the MUZ-LN60 the trigger is the current getting close to the breaker rating instead.

Source: Mitsubishi Electric service manual OBH931 Rev B (MUZ-AY, Dec 2024), p. 43

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Mitsubishi Electric error codes