Mitsubishi Electric error codes

Indoor lamp in recall mode: outdoor faults

Mitsubishi Electric 14 blinks

Stop valve closed

Mitsubishi Electric MSZ-AY / HR / EF / LN – lamp and LED codes

Ranges
  • MSZ-AY / MUZ-AY
  • MSZ-HR / MUZ-HR
  • MSZ-EF / MUZ-EF
  • MSZ-LN / MUZ-LN
  • Outdoor unit

First checks

Open the stop valve.

Note

Detected from the compressor current. 14 blinks can also mean a 4-way valve or pipe temperature error.

Source: Mitsubishi Electric service manual OBH931 Rev B (MUZ-AY, Dec 2024), p. 41–42

Mitsubishi Electric MSZ-AY / HR / EF / LN – lamp and LED codes

Ranges
  • MSZ-AY / MUZ-AY
  • MSZ-HR / MUZ-HR
  • MSZ-EF / MUZ-EF
  • MSZ-LN / MUZ-LN

4-way valve or pipe temperature error

  • Outdoor unit

Likely causes

The 4-way valve does not switch; abnormal indoor coil thermistor reading.

First checks

Check the R.V. coil (230 V on CN721, in HEAT only) → check the inverter board.

Note

14 blinks can also mean a closed stop valve.

Source: Mitsubishi Electric service manual OBH931 Rev B (MUZ-AY, Dec 2024), p. 41–42

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Mitsubishi Electric error codes