Vivax error codes

Codes in the 2018 service manual

Vivax E1

Indoor ↔ outdoor communication error

Midea – old 2-character codes (about 2017–2019)

Ranges
  • AENI (N+)
  • AEHI+ (H+)
  • AEYIs (Y)
  • Indoor unit
  • Lamps: run lamp blinks 2×, timer lamp off

Likely causes

Interconnect wiring, reactor, outdoor PCB, indoor PCB.

First checks

Check the wiring and terminals; measure DC volts between outdoor terminals 2 and 3: the reading should swing between + and −; always + → outdoor side, fixed → indoor side; reactor ≈ 0 Ω.

Note

Shown when the indoor unit gets no reply for 150 s, four times while running.

Source: Oasis Plus 3D Inverter Series 2018 Service Manual, R32, p. 62–63

Vivax T Design (ACP-…LCTI)

Ranges
  • T Design

Indoor room temperature sensor fault

  • Indoor unit

Source: Vivax owner's manual ACP-xxCHxxLCTI R32 Black, p. 34

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Vivax error codes