Vivax error codes

Codes in the 2018 service manual

Vivax F2

Outdoor coil sensor T3 open or short

Midea – old 2-character codes (about 2017–2019)

Ranges
  • AENI (N+)
  • AEHI+ (H+)
  • AEYIs (Y)
  • Outdoor unit
  • Lamps: run lamp blinks 3×, timer lamp lit

Likely causes

Sensor, its connector, outdoor PCB.

First checks

Check the connector; measure the sensor's resistance against its table; sampling voltage below 0.06 V or above 4.94 V = fault → sensor, else PCB.

Source: Oasis Plus 3D Inverter Series 2018 Service Manual, R32, p. 67

In the app you also find codes by the model number on the nameplate, and Diagnose judges your readings.

Open in the appAll Vivax error codes